FARGO electronic DTC500 - Manual (Page 314)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 314
Removing the Media from the Printer
The following have now been removed from the Printer:

Card Weights (D850448)

Cards

Print Ribbon

Cleaning Cartridge
(Note: At this point, the Upgrade is complete. If repackaging the Printer for delivery,
continue with to the next procedure.)
Repackaging the Printer
Step Procedure
1 a. Discard the white Cleaning Cartridge Instruction sheet. Replace it with the
yellow card.
b. Insert this yellow card into the empty Cleaning Cartridge slot inside the
Printer.
2 Set the blue Quality Assurance Certificate onto the Print Arm.
3 Tape all openings closed.
a. Cover the Communication Ports with tape.
b. Tape the Top Cover closed at two (2) locations.
c. Tape the Output Tray in place.
4 Pack the new Cleaning Cartridge.
a. Carefully cut open the supply pack on the bottom of the shipping box, if it is
not already open.
b. Remove the old Cleaning Cartridge.

Remove the cleaning Roller from the old Cartridge. Retain it as a spare
Roller.

Discard the rest of the old Cleaning Cartridge.
c. Place new cartridge (with the sticker and the liner applied) into the pack.
Continued on the next page