FARGO electronic DTC500 - Manual (Page 271)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0) 271
Showing the Card Count
Step Procedure
1 Choose SHOW CARD COUNT to view counts for Card Count (CC) and Pass
Count (PC).

Card Count is the total number of cards the Printer has produced.

Pass Count is the total number of print passes made by the Printhead.
(Note: A pass is measured each time a single Ribbon panel is printed or
passes beneath the Printhead.)
Selecting the System Upgrade (Firmware Upgrade)
This option is used to upgrade the Printer Firmware.
Step Procedure
1 Upgrade by selecting SYSTEM UPGRADE.
The LCD will prompt: Are you sure you want to continue?
2 Select YES to begin the System Upgrade.
OR
Select NO to return to the READY screen. See the the Updating the Printer
’
s
Firmware procedure in Section 9, page 275.