Ables, Dapters, 22 power connector – FOCUS Enhancements Bridge/Router MX-4DV User Manual
Page 26
MX-4 DV U
SER
G
UIDE
C
HAPTER
3
22
Power Connector
The MX-4 DV package contains the required transformer and power cord for the unit.
To connect the power cord and transformer:
1
Connect the female plug on the power cord into the male socket on the transformer.
2
Connect the male plug on the power cord to a suitable power outlet.
3
Connect the power adapter plug on the transformer cord into the power connector on the MX-
4 DV rear panel.
4
Turn the MX-4 DV power switch (located on the right side of the unit) to the ON position.
C
ABLES
AND
A
DAPTERS
To connect video devices to the MX-4 DV you need specific types of cables. You might also need
one or more adapters, depending on your equipment.
Look closely at the jacks on the MX-4 DV rear panel and note that they accept RCA Composite,
S-Video (Y/C), or Digital Video (DV)cables.
Before connecting any device to the MX-4 DV, make sure the cable you are using has the right
type of fitting for the jack you intend to use.
Power
Adapter
Plug
Male
Plug
Male Socket
Female Plug
Transformer
Power Cord
WARNING
U
SE
ONLY
THE
POWER
CORD
AND
TRANSFORMER
PROVIDED
IN
THE
PACKAGE
. D
O
NOT
USE
THIS
POWER
CORD
AND
TRANSFORMER
WITH
ANY
OTHER
EQUIPMENT
. F
AILURE
TO
OBSERVE
THESE
CONDITIONS
CAN
DAMAGE
YOUR
EQUIPMENT
AND
VOID
YOUR
WARRANTY
.
RCA
Composite
S-Video
(Y/C)
Digital Video
Connector