FOCUS Enhancements Bridge/Router MX-4DV User Manual
Page 18
MX-4 DV U
SER
G
UIDE
C
HAPTER
2
14
Use
LEFT
and
RIGHT
ARROWS
to move the selection horizontally. Use
UP
and
DOWN
ARROWS
to move the selection vertically: or, press 2 then
OK
to select the transition by number.
The MX-4 DV transitions between the two sources using the horizontal wipe transition with the
Output screen showing the results.
Running Transitions
You can run transitions automatically or manually.
Automatic
Transitions
•
Press
PLAY
. The MX-4 DV runs the transition at a pre-determined speed.
The
MX-4 DV transitions between the two sources using the horizontal wipe transition with
the Output screen showing the results.
At the end of the wipe, B is on the OUTPUT monitor — it has become the CURRENT source. The
yellow highlight above the preview images has changed to reflect that. Furthermore, A is now the
NEXT source and the green highlight has been changed to A.
•
To wipe back and forth between sources A and B, press
PLAY
repeatedly.
•
To change the speed at which a transition runs, press the
SPEED
button. The Speed indi-
cator under the transition icon changes.
•
Press the button again until the desired speed appears. 0 is the slowest speed, 9 is the fast-
est.
•
Try this with various speeds: Change the speed and press
PLAY
.
Manual
Transitions
Use the
TAKE
BAR
to run transitions and control their speed and direction.
•
Set up the transition as you would normally. However, instead of pressing
PLAY
, simply move
the
T
-
BAR
.
The transition begins running as soon as you move the
T
-
BAR
. You can even move back and
forth by moving the
T
-
BAR
in different directions. Give it a try!
Using CUT Transitions
Most video productions use simple cuts a majority of the time. To cut between any two sources (for
example, you could cut from A to C to BACKGROUND to D), use the
CUT
buttons.
There’s a quick way to cut back and forth between two sources using just the
PLAY
button, instead
of having to alternate between two
CUT
buttons:
•
Press 0 and then
OK
to select transition 0, a simple cut.
•
Press
PLAY
again and again.
•
A solid color screen can be used as if it were a separate source. Press the
NEXT
/
BACKGROUND
button and run any transition, or press
CUT
/
BACKGROUND
.
Selected Transition
Speed