FOCUS Enhancements Bridge/Router MX-4DV User Manual
Page 128
MX-4 DV U
SER
G
UIDE
C
HAPTER
13
124
5
The MX-4 DV is now networked, and it should be visible as an FTP device.
IP Setup for a Computer or Laptop
To set up your PC to communicate with the MX-4 DV (Static IP address):
Win98SE/Win2000/XP Pro/WinT40/WinT40 Server
1
Plug in the crossover cable (R5) to the MX-4 DV Ethernet port and your computer’s Ethernet
port.
NOTE
A straight cable has the same wire configuration colors on each end.
A crossover cable has two different wire configuration colors on each end.
Make sure to use the included crossover cable if you are working with a PC.
2
On your computer, select My Network Places from the desktop and right click and select
Properties.
a
Select Local Area Connection and click Properties.