Exit discarding changes, Load setup defaults, Discard changes – FUJITSU DESKPOWER 6000 User Manual
Page 76: Save changes
66
●
Exit Discarding Changes
This item exits the BIOS setup utility without saving changes to the CMOS RAM and
reboots the computer. All changes are discarded. If the Enter key is pressed while
changing setup values, the message shown below is displayed. To discard changes,
select [No] and press the Enter key.
●
Load Setup Defaults
This item loads default values to all setup items. Press the Enter key to display the
message shown below. Select [Yes] and press the Enter key.
●
Discard Changes
This item loads values before change from the CMOS RAM to all setup items and discards
all changes. Press the Enter key to display the message shown below. Select [Yes] and
press the Enter key.
●
Save Changes
This item saves changes to the CMOS RAM. Press the Enter key to display the message
shown below. Select [Yes] and press the Enter key.
Setup Confirmation
Configuration has not been saved!
Save before exiting?
[
Yes
]
[No]
Setup Confirmation
Load default configuration now?
[
Yes
]
[No]
Setup Confirmation
Load previous configuration now?
[
Yes
]
[No]
Setup Confirmation
Save configuration changes now?
[
Yes
]
[No]