FUJITSU DESKPOWER 6000 - Manual (Page 38)

28
6
Install the retaining metal bracket at the side.
Insert the pawls of the retaining metal bracket
into the groove on the front of the PC main
unit, then install the metal bracket.
Secure the metal bracket with the screw
removed in step 2.
7
Attach the upper cover.
- Store the removed slot cover.
- To remove the expansion card, reverse the above steps.
- For display cards (For Windows 95/98 models)
To install a display card, delete the “ATI mach64 display driver” as follows before
installing display cards.
8
Switch on the PC.
- For Windows 95/98 models:
The device driver and resources are set automatically, and the extension card can be used.
- The device driver selected automatically with the Plug & Play function has been
pre-registered in Windows 95/98 but may not have been registered depending on the
expansion card or peripheral, in which case prepare the floppy disk containing the device
driver included with the expansion card and set up the device driver in accordance with the
message.
- Check whether the device driver has been correctly registered by the device manager before
using the expansion card. If the driver has not been registered, delete the device driver, then
restart Windows 95/98.
- For Windows NT model:
Set up the device driver of an expansion card.
See the manual included with the expansion card. The expansion card is rendered usable
when the device driver has been set up.
Point
Point