FUJITSU DESKPOWER 6000 - Manual (Page 67)

57
4
– Wake up LAN
This item sets whether to turn on the computer or to return from Suspend mode when a
magic packet is received from the standard LAN port.
- Disabled (Initial value)
The computer is not turned on or returned from Suspend mode after receiving a
magic packet.
- Enabled
The computer is turned on or returned from Suspend mode after receiving a magic
packet.
- This item is not available when Windows 98 runs in ACPI mode.
- For PME LAN cards (PCIs), use ‘Wake up on PCI PME.’
– Wake up on Modem Ring
This item sets whether to turn on the computer or to return it from Suspend mode when a
call terminates on the modem (connected to a serial port).
- Disabled (Initial value)
The computer is not turned on or returned from Suspend mode when a call
terminates on the modem.
- Enabled
The computer is turned on or returned from Suspend mode when a call terminates
on the modem.
- This item is not available when Windows 98 runs in ACPI mode.
- For PME LAN cards (PCIs), use ‘Wake up on PCI PME.’
– Wake up on PCI PME
This item sets whether to turn on the power or to return it from Suspend mode when a
PCI extension card issues a PME signal.
- Disabled (Initial value)
The computer is not turned on or returned from Suspend mode when a PME signal
is issued.
- Enabled
The computer is turned on or returned from Suspend mode when a PME signal is
issued.
This item is not available when Windows 98 runs in ACPI mode.
Point
Point
Point