FUJITSU DESKPOWER 6000 - Manual (Page 41)

31
4
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select : Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
System Time: [ 12 :34:56]
System Date: [20/06/1999]
Legacy Diskette A: [1.44/1.25 MB 3.5”]
: Primary Master: [6449 MB]
: Primary Slave: [None]
: Secondary Master: [CD-ROM]
: Secondary Slave: [None]
Language: [English (US)]
Item Specific Help
Adjust calendar
clock.
, ,
or selects
field.
4
A message “Press
Press the F2 key to display the BIOS Setup screen.
Menu bar
Lists seven menu items:
Main, Advanced,
Security, Power, Boot,
Info, and Exit.
Setup field
Lists items and their
setup values for each
menu.
Help field
Displays an explanation
of items selected by the
cursor.
Key list
Lists keys available
during setup.
○ ○ ○ ○ ○ ○ ○ ○
Key functions
The table below lists the functions of the keys used for BIOS setup.
F1 key
←
and
→
keys
↑
and
↓
keys
- and Space keys
F9 key
Esc key
Enter key
F10 key
Tab key
Used to display the overall explanation of BIOS setup. To
proceed to the next page, press the PageDown key. To return
to the setup screen, press the Esc key.
Used to switch between menus.
Used to move the cursor to an item to be set up.
Used to select a desired setup value.
Used to return all setup values to the PC standard values.
Used to display the Exit menu. If the screen displays a
submenu, the previous screen is returned.
Used to display submenus of items marked
: . When the Esc
key is pressed while a submenu is displayed, the screen
returns to its menu.
Used to return to setup values currently set up.
Used to move the cursor between hours, minutes, and seconds
while the time is set up.
○ ○ ○ ○ ○ ○
Exiting BIOS setup
1 Press
←
or
→
to select the Exit menu.
2 For existing BIOS setup by saving setup values
→
Move the cursor to “Save Change & Exit” and press the Enter key.
For exiting BIOS setup without savings setup values
→
Move the cursor to “Exit Without Saving Changes” and press the Enter key.
The BIOS setup utility exits and the computer is rebooted.