FUJITSU DESKPOWER 6000 - Manual (Page 15)

5
1
Connect the liquid-crystal display cable
to the PC main unit.
Attach the liquid-crystal display cable
connector to the connector on the rear of
the PC main unit and tighten the cable
connector screws.
○ ○ ○ ○ ○ ○ ○ ○
Attaching display, keyboard, mouse, and LAN cables
This section explains how to connect a liquid-crystal
display. To connect a CRT display, use the power
cord included with your PC package. The power cord
included with the CRT display is not used.
Point
Connect the LAN cable
Attach the other end of the
twisted pair cable (purchased
separately) to the LAN
connector on the rear of the PC
main unit.
Connect the power cord to
the outlet.
Attach one end of the plug of
outlet conversion cable included
with the liquid-crystal display to
the outlet of the PC main unit.
Connect the power cord to the
liquid-crystal display
Attach the other end of the outlet
conversion cable included with
the liquid-crystal display to the
inlet on the rear of the PC
main unit.