FUJITSU DESKPOWER 6000 - Manual (Page 72)

62
● Boot Device Priority
This item sets the priority of devices to load the OS using a submenu. Move the cursor to
this item and press the Enter key to display a submenu as shown below.
The priority is the order of each item. (The lowest number indicates the highest priority.)
Select the device whose priority is to be changed using the
↑
or
↓
key. The selected item
moves up to a higher priority when the space is pressed and moves down to a lower
priority when the - key is pressed.
For booting from a CD-ROM, a CD-ROM containing an OS capable of being booted is
required.
Before turning on or booting the power, set the CD-ROM on the CD-ROM drive.
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select : Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
Boot Device Priority
1. [ Floppy Disk Drive ]
2. [Hard Disk Drive]
3. [ATAPI CD-ROM Drive]
Item Specific Help
Use <
↑
> or <
↓
> to
select a device, then
press <+> or
to move it up the
list, or <-> to move
it down the list.
Press to exit
this menu.
Point