FUJITSU DESKPOWER 6000 - Manual (Page 64)

54
Power Menu
The Power menu is used to set up the power savings mode.
The power savings mode is used to place the computer in standby mode and reduce power
consumption if the system is on but not being used.
Select Power using the
←
or
→
key to display the Power menu.
○ ○ ○ ○ ○ ○ ○ ○
Details on setup items
● Power Savings
This item sets the level of the power savings mode.
- Disabled (Initial value for Windows 98 model)
The computer does not enter the power savings mode. ‘Hard Disk Timeout’ changes to
[Disabled];, ‘Display Timeout’ to [Disabled]; and ‘Standby Timeout’ to [Disabled].
- Customized (Initial value for Windows 95 and Windows models)
The user can set ‘Hard Disk Timeout,’ ‘Display Timeout,’ and ‘Standby Timeout’ separately.
- Maximum Power Savings
This item minimizes power consumption. ‘Hard Disk Timeout’ is set to [1 minutes]; ‘Display
Timeout’ to [2 minutes]; and ‘Standby Timeout’ to [1 minute], respectively.
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select : Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
Power Savings: [ Customized ]
Hard Disk Timeout: [Disabled]
Display Timeout: [Disabled]
Standby Timeout: [30 Minutes]
Power Switch Mode: [Power Off]
: Automatic Wake up
APM Power Controls: [Enabled]
: ACPI Features
Item Specific Help
[Customized]
Alter each settings
individually.
[Maximum Power
Savings]
Minimize power
consumption.
[Maximum Performance]
Maximize performance.
[Disabled]
The feature is
disabled.
*APM OS override this
setting.
*ACPI OS ignores this
setting.