Horizontal mode, 1 operational overview, Figure 2-1 control panel – Furuno CH-250 User Manual
Page 19
2-1
2. HORIZONTAL MODE
2.1 Operational
Overview
The figure below shows the typical horizontal mode operating sequence.
GAIN
SECTOR
TRAIN
RANGE
TILT
MAIN
SUB
FULL
HALF
FAST
SCAN
BRILL
TARGET
MENU
R/B
EVENT
CUSTOM MODE
DISPLAY MODE
POWER
XDR
2.
Lower the
transducer.
9.
Adjust gain.
6(a).
Set scanning sector.
7.
Set center bearing of train
sector.
5.
Set range.
8.
Set tilt angle.
3.
Adjust screen
brilliance.
6(b).
Select training sector for
full circle.
4.
Select appropriate
horizontal mode.
10.
Measure range and
bearing to target with cursor.
11.
Adjust menu settings
(ex. TVG) as required.
1.
Turn on the power.
Figure 2-1 Control panel