FUJITSU SPARC ENTERPRISE M3000 - Manual (Page 188)

B-6 SPARC Enterprise M3000 Server Service Manual • November 2009
B.3.2 CD-RW/DVD-RW Drive Unit (DVDU)
TABLE B-6 shows CD-RW/DVD-RW drive unit specifications.
For the replacement procedure, see Chapter 11 .
B.4 Power Supply Unit
The power supply unit provides the server with power received from the external
power source. The redundant configuration allows continued server operation if a
power supply unit fails.
TABLE B-7 shows the electrical specifications.
TABLE B-6 CD-RW/DVD-RW Drive Unit Specifications
Item Description
Number of CD-RW/DVD-RW drive units 1
Interface Advanced Technology Attachment Packet
Interface (ATAPI)
Location Above hard disk drive
Active replacement No
Hot replacement No
Cold replacement Yes
TABLE B-7 Electrical Specifications
Item Specifications
Frequency of CPU 2.52 GHz 2.75 GHz
Input voltage 100-120 ACV 200-240 ACV 100-120 ACV 200-240 ACV
Number of power cords 2 (one for each power supply unit)
Power cord length 3 m/9.84 ft
Cooling fan unit 2 (1 for each power supply unit)
Redundancy 1 + 1 redundant configuration
Rated current * 4.80 A 2.59 A 5.15 A 2.81 A
Frequency 50/60 Hz