FUJITSU SPARC ENTERPRISE M3000 - Manual (Page 10)

viii SPARC Enterprise M3000 Server Service Manual • November 2009
4.5.2 FRU Removal and Replacement 4–13
4.5.3 Powering on the Server 4–13
4.5.3.1 Power-on by Using the XSCF Command 4–13
4.5.3.2 Power-on by Using the Operator Panel 4–14
4.5.4 Verifying the Hardware Operation 4–15
5. Internal Components Access 5–1
5.1 Sliding the Server Into and Out of the Equipment Rack 5–1
5.1.1 Sliding the Server Out from the Equipment Rack 5–1
5.1.2 Sliding the Server into the Equipment Rack 5–3
5.2 Removing and Attaching the Top Cover 5–3
5.2.1 Removing the Top Cover 5–3
5.2.2 Attaching the Top Cover 5–4
5.3 Removing and Attaching the Air Duct 5–4
5.3.1 Accessing the Air Duct 5–5
5.3.2 Removing the Air Duct 5–5
5.3.3 Attaching the Air Duct 5–6
5.4 Removing and Attaching the Fan Cover 5–6
5.4.1 Removing the Fan Cover 5–6
5.4.2 Attaching the Fan Cover 5–7
6. Motherboard Unit Replacement 6–1
6.1 Accessing the Motherboard Unit 6–4
6.2 Removing the Motherboard Unit 6–7
6.3 Mounting the Motherboard Unit 6–8
6.4 Reassembling the Server 6–9
7. Replacement and Installation of Memory 7–1
7.1 Memory Mounting Rules 7–3
7.1.1 Confirmation of DIMM Information 7–3