Hitachi DZ-HS803A - Manual (Page 84)

84
Du
bb
in
g on
DV
D
You can dub all scenes recorded on
the HDD from the beginning in
sequence.
Dubbing All Scenes
Recorded on the HDD
(“All”)
1
Connect the AC adapter/charger to
the camcorder (p.38).
• Dubbing is not possible if a
battery pack is used as a power
source.
2
Turn the power switch to “HDD”
(p.24).
3
Press DUBBING.
The Dubbing Menu appears.
4
Select “All”, then press the
confirmation button.
The “Dubbing(All)” screen
appears.
5
Choose a disc for dubbing and insert
it into the camcorder (p.34).
6
Check the screen for finalization
setting.
If you are using a DVD-RW (VF
mode) or DVD-R, you can
finalize the disc continuously
after dubbing is complete.
Select “YES” to finalize or “NO”
not to finalize.
7
Select “YES“, then press the
confirmation button.
Dubbing starts.
8
When another disc is needed to
continue dubbing, a message screen
requesting another blank disc
appears. Replace a disc with a new
one.
9
After the dubbing is complete, the
confirmation screen whether or not
you delete the dubbed scenes
appears.
• If you wish to erase the dubbed
scenes, select “YES”.
• If you wish to leave them on the
HDD, select “NO”.
10
Remove the disc.
• Or press C to end.
Hint
You can also display the Dubbing
Menu from the Disc Navigation
screen. Press
, press MENU,
select “Scene” “Dubbing”
“Dubbing Menu”, and then press
the confirmation button.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 84 Friday, September 12, 2008 8:22 PM