Hitachi DZ-HS803A - Manual (Page 22)

22
Le
t’s G
et
St
arte
d
„ Turning on the Power
1
Turn on the power.
2
Open the LCD monitor.
„ Changing the display language
You can change the language used on screens and menus as follows.
Press MENU, then select “Initial Setup” by pressing f/e.
Then press c (or the confirmation button).
1
2
Press and hold the gray button, and turn the power switch to “HDD”, “DVD”, or “SD”.
* You do not need press the gray button
when you turn off the switch or switch
between “HDD” and “DVD”.
A (Confirmation button)
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 22 Friday, September 12, 2008 8:22 PM