Jumping to the designated scene – Hitachi DZ-HS803A User Manual

Page 50

Jumping to the designated scene

Press MENU after step

of “Choosing and playing back a scene” (p.48)—while a

scene is played back.
The Menu appears.

Select “Go To” by pressing f/e, then press c.

Select “Top”, “End”, or “Specify” by pressing f/e, then press the confirmation
button to confirm.
Top: Goes to the beginning, then pauses playback.
End: Goes to the end, then pauses playback.
Specify: Goes to the specified point, then pauses playback. (See next page on

how to specify a point.)

Press the confirmation button.

Select multiple scenes
individually

Select a scene by pressing d/c/f/e,
then press PHOTO/SELECT.

Repeat this step to choose the next scene.

Using the current scene as

your starting point, select
multiple previous or

succeeding consecutive

scenes

Press and hold PHOTO/SELECT until the
cursor frame becomes blue.

Choose a final scene by pressing

then press the confirmation button to confirm the
setting.

Select all scenes from the
first scene to the current

scene. (Menu option:
Start– Current)

Press MENU, select “Scene” by pressing

then select “Select” by pressing

Press

or the confirmation button.

After choosing the desired option by pressing f/
e

, press the confirmation button to confirm the

setting.

Select all scenes from the
current scene to the final
scene. (Menu option:
Current– End)
Select all scenes on the
media. (Menu option: All)
Cancel operations while
selecting the range (while a
blue frame is displayed)

Press C.

Cancel selected scenes
individually

Move the cursor frame (yellow) to a selected scene (red)
you want to cancel and press PHOTO/SELECT.

Cancel all scenes selected

Press C.

HDD RAM -RW (VR)

-RW (VF)

CARD

+RW

DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 50 Friday, September 12, 2008 8:22 PM

This manual is related to the following products:

DZ-HS903A