Hitachi DZ-HS803A - Manual (Page 34)

34
Fun
ctio
ns an
d C
har
acte
risti
cs
o
f H
D
D
/D
V
D/
C
ard
s
„ Inserting a DVD
Close the lid.
The ACCESS/PC indicator flashes. During this process, do not remove the
power source, shake, or subject the camcorder to impacts.
When a new DVD-RW or +RW is inserted, see p.36.
Attach the charged battery pack to
the camcorder or connect the
camcorder to a wall outlet.
Turn the power switch to “OFF”.
Then, press down the DISC
EJECT
switch until the ACCESS/
PC indicator lights, then release.
After several seconds, the lid pops
open. Open it fully with your hand.
Place the recording surface of the DVD
face down, then push down on the
center of the DVD until it clicks into
place.
• For single-sided discs, the side
opposite the label is the
recording surface.
• To record on the other side for
double-sided discs, remove the
disc (p.35), flip it over, and
reload it.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 34 Friday, September 12, 2008 8:22 PM