Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 53)

1. Press BROWSER to open the Browser.
2. Press pad 6 to select its Sound.
3. Press Button 2 above the displays repeatedly until SAMPLES is selected.
4. Check that Button 4 above the displays is not fully lit and that the USER label under-
neath is not highlighted; if necessary, press Button 4 to disable it.
5. Move the 4-D encoder to the left or to the right in order to put the focus (indicated by the
brackets) on All Types , then turn the encoder to select the Drums type, thereby limiting
the results to the drum Samples:
You can also press and hold the 4-D encoder to temporarily display all available types; you
can even turn the encoder while pressing it to see where your selection currently is.
6. Move the 4-D encoder one step to the right to put the focus (the brackets) on the All Sub-
Types label that just appeared, and turn (or press and turn) the encoder to select the
Snare sub-type.
7. Move the 4-D encoder one more step to the right to put the focus on the new All Sub-
Types label that just appeared, and turn (or press & turn) the encoder to select the Side
Stick sub-type.
8. Move the 4-D encoder another step to the right to put the focus on the Results list.
9. Press and hold SHIFT + Button 8 to activate PREHEAR .
10. Turn the 4-D encoder to scroll through all side stick Samples.
11. Once you have found a suitable side stick Sample, press the 4-D encoder to load it into
the Sound slot currently selected (the one triggered by pad 6 ).
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE - Getting Started - 53