Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 36)

6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group
A:
3.1.2 Loading a Drum Kit from the Factory Library Using the Controller
On your controller, do the following:
1.
Press button A on the left of your controller to select the first Group slot. This is where
you are going to load the drum kit. Button A should be lit to indicate that it is selected.
2. Press the BROWSER button at the top left of your controller.
3. Press Button 1 or Button 2 above the displays to select GROUPS .
4. Check that Button 4 above the displays is not fully lit and that the USER label under-
neath is not highlighted; if necessary, press Button 4 to disable it.
5. Move the 4-D encoder to the left or to the right in order to put the focus (indicated by the
brackets) on
All Types .
6. Press and hold the 4-D encoder to view which Group types are available.
7. While holding the 4-D encoder, turn it to select Kits .
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE - Getting Started - 36