Native Instruments MASCHINE MK3 Groove Production Studio (Black) - Manual (Page 50)

4. If you have already created more than one Project, turn the 4-D encoder or Knob 8 until
My First Project is selected on the right display.
5. Press the 4-D encoder or Button 8 to load the Project.
6. Press BROWSER to leave the Browser.
The BROWSER button turns off.
→ You can continue to work on your tutorial Project.
You will note that every action you did on the controller is directly mirrored in the Browser of the
MASCHINE software. This is true in both directions.
Opening a Recent Project Using the Controller
Your MASCHINE controller also provides a handy way to open Projects on which you worked
recently:
1.
Press FILE to open the File mode.
The right display shows a list of your recent Projects.
2. Turn the 4-D encoder or Knob 8 to select the desired Project from the list.
3. Press the 4-D encoder or Button 8 to load the selected Project.
4. Press FILE to leave the File mode.
→ You can continue to work on your Project.
The File mode provides additional options for managing your Project files directly from your control-
ler: start a new Project, save a copy of the current Project, or save the Project under a new name.
For more information, please refer to the Manual.
4.2 Customizing Your Drum Kit
You might want to replace one or more drums from the Group “EK-TL A Kit” with ones that
sound better with your Pattern. To do this, you must make use of the Browser again.
Building Your Own Drum Kit
Customizing Your Drum Kit
MASCHINE - Getting Started - 50