AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) - Manual (Page 78)

KONA Capture, Display, Convert v15.5 78 www.aja.com
**HDR support is application dependent. Check with your software manufacturer
for compatibility.
Note: KONA 5 SDI connectors are HD BNC
SDI I/O
• SDI connections are bidirectional
• 2K/HD, capture and monitoring is simultaneous
• 4K/UltraHD with 12G-SDI, capture and monitoring is simultaneous.
• 4K/UltraHD with 3G-SDI, all four connections must be used for either Input
or Output.
• 8K/UltraHD2 with 12G-SDI, connections must be used for either Input or
Output.
Note: When connections are configured for 12G-SDI or 6G-SDI, only UltraHD/4K/
UltraHD2/8K formats are supported.
Audio Inputs Digital
• 16-Channel 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (via 4x BNC on breakout
cable)
Audio Outputs Digital
• 16-Channel 24-bit SDI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel 24-bit HDMI embedded audio, 48 kHz sample rate, synchronous
• 8-Channel 24-bit AES/EBU audio, 48 kHz sample rate, synchronous or
nonsynchronous, internal sample rate conversion (via 4x BNC on breakout
cable)
Downstream Keyer
• Supports graphics up to 2K/HD with alpha channel over video, matte or
framebuffer, or framebuffer content over incoming video or matte
Reference
• Analog Color Black (1V) or Composite Sync (2 or 4V) or HD Tri-Level Sync (1V)
(via 1x HD-BNC at PCIe bracket)
• Reference input is terminated into 75 ohms when Genlock is set to Ref In
Timecode
• LTC timecode input and output (via 2x BNC on breakout cable)
• LTC timecode input (via 2-pin header on PCIe card)
• LTC timecode input (via HD-BNC at PCIe bracket)
Electrical Interface
• 8-lane PCIe 3.0