beautypg.com

Color meanings, Input/output icons, Framebuffer – AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) User Manual

Page 29: Device format, Converted format

background image

KONA Capture, Display, Convert v15.5 29 www.aja.com

Color Meanings

All items in the AJA Control Panel block diagram are color-coded to show what is

happening in real time. This applies to both icons and text. These colors indicate:

Blue

Video is same format as the Device Format (framebuffer).

Green

Indicates that KONA is performing an active change to the video making it

different from the Device Format (e.g., down-conversion).

Red

The selected operation cannot be performed.

Yellow

Reference video (black burst or other reference source).

Input/Output Icons

The input and output icons are triangles that together with their color show all

the input and outputs and their status (selected, not selected, input present or

not, format, etc.). A complete video path is shown when inputs and outputs are

connected with lines going to/from the framebuffer.

Figure 22. Input/Output Icons

Framebuffer

The framebuffer is the “engine” where your third-party applications interface with

the AJA device. The framebuffer has a format (called the “Device Format”) and

color space that it follows, as defined in the linked menu screens or via external

application software.

Device Format

The Device Format is the media format written to disk and used in your project.

This is the format that the framebuffer will use and is shown in the Control Panel

using the color blue. It is the format that the third-party application software will

either receive from the AJA hardware, or is sending to the hardware. All icons in

blue are the same as the Device Format used by the framebuffer. Also any text

descriptions in the block diagram that appear in blue indicate that something is

in the Device Format. For example:

• If the input and output icons are blue, you know that the same format is used

throughout the video path. No format conversion is being performed.

• If the input or output icon colors differ (blue input and green output icons for

example), you know that a format conversion is being performed.

Converted Format

NOTE: A Converted Format is not available on a KONA 4 operating in 4K Mode, or on the

KONA 5 or KONA 1 cards.