AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) - Manual (Page 32)

KONA Capture, Display, Convert v15.5 32 www.aja.com
Shared Preferences
An administrator can establish house standards for the AJA Control Panel by
creating the user preferences file (described above) and placing it in a shared
location where it will establish a standard default startup state for all users of a
given computer system. These settings preempt the initial AJA default settings.
To establish the House Default for every user on every system, a system or
network administrator can move this default file to all systems on the network
(manually or by pushing it out across the network). All users on the network will
then open to the House Defaults when they launch the AJA control panel for the
first time.
NOTE: If the user makes changes to the control panel themselves, those changes will
be saved in their user preferences, which will take priority over the house default
dictated by the shared preferences file.
The Shared Preferences file should be a file created at the User Preferences
location described above, and placed by the System Administrator in the
following locations.
On Mac:
/Users/Shared/Library/Preferences/com.aja.devicesettings
On Windows:
C:\Users\All Users\Aja\com.aja.devicesettings
Function Screens
Listed below are the function screens for KONA and what they are used for.
Table 1. KONA Function Screens
Screen Functions
Control Configure some basic operation options and output timing.
Format Select the framebuffer primary video format.
Conversion (KONA 4 in UFC mode only) Permits selection of a Conversion Format.
Input Select View and edit input selections and audio mapping.
SDI Output Select output format.
HDMI Configure the HDMI output (not KONA 1).
HDR (KONA 5 and KONA 4 in UFC mode only) Configure High Dynamic Range settings
for HDMI output.
Analog Out Configure the component format and audio monitor setup (not KONA 1, KONA 5).
Video Setup Configure Video such as composite black level, progressive format and ancillary
data (Closed Caption) option.
Audio Setup Configures Audio options such as analog audio monitor level.
Audio Mixer Select and mix audio sources for playback and capture (not KONA 4 in UFC Mode).
DS Keyer Setup and control the insertion of keyed video from the framebuffer or graphics
files with alpha channel.
LUT Load a lookup table (LUT) file to adjust the calibration of color for any source.
Timecode Monitors SMPTE 12M-2 timecode and configure timecode window burn output.
Presets Add or delete saved preset configurations (handy for quick and easy recall of
different KONA settings for varied workflows).
Firmware Install device firmware from your currently installed AJA software package.