AJA KONA 4 PCI-E Video I/O Card (HDMI Output, Cable Included) - Manual (Page 47)

KONA Capture, Display, Convert v15.5 47 www.aja.com
Analog Out Screen
NOTE: This screen is not available for the KONA 5 or KONA 1 cards.
KONA 4 provides a high-quality analog component or composite + Y/C output,
generally used for monitoring. This screen shows the current settings for that
analog output, and allows you to re-configure it when desired (format and black-
level).
Analog Output
Select
Sets the analog output format. If a conversion is applied, you’ll see the conversion
icon appear on the block diagram.
• Auto - Automatically sets the analog video output format, based on the input
or selected format.
• Primary - Selects the framebuffer format for output.
• Secondary (KONA 4 in UFC mode) - Sets the output to the Converted Format
(set in the Format screen) for up/down/cross-conversion).
• 4K Quarter (KONA 4 in 4K mode) - Sets a downconversion to 2K x 1080 in 4K or
1920 x 1080 for UltraHD.
Format
Select the video format from the Format pulldown.
• Composite + Y/C
• Component (SMPTE)
• Component (Beta)
• Component (RGB)