beautypg.com

18 monitoring, 1 status information and status overlays, Monitoring – ARRI ALEXA Mini LF Ready to Shoot V-Mount Set (LPL) User Manual

Page 74: Status information and status overlays, Evf and sdi status information

background image

Monitoring

74

18 Monitoring

The monitoring submenu covers all settings related to EVF, Monitor and SDI as well as frame lines and

other overlays on these outputs.

18.1 Status Information and Status Overlays

EVF and SDI Status Information

The camera displays camera status information on the MVF-2 and the SDI outputs. At the top and

bottom of the screen, the camera displays textual status information. The top status bar consists

of sensor FPS, shutter angle, exposure index, ND filter and white balance. The bottom status bar

displays information about the battery level, reel and clip, camera status, remaining recording time and

timecode.
On the left and right of the screen, icons provide information about the current status of the camera.

The icons are organized into groups. The left icon groups display the EVF/SDI configuration as well

as the camera configuration. Additionally various other icons are displayed below to indicate certain

active parameters. The right side shows the audio meters as well as other icons (described below).

Furthermore the user can activate the display of additional camera information such as lens data and

electronic horizon.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Top Section

1

FPS

Shows the current sensor frame rate. The FPS label turns orange if the sensor frame rate does not

match the project rate.

2
3
4
5
6

SHUTTER
IRIS
EI
ND
WB

Shows the current shutter value (here: shutter angle).
Shows the current lens IRIS, including sub stops.
Shows the current exposure index.
Shows the current setting for the ND filter.
Shows the current white balance value.

Bottom Section

7
8

FCL
BAT

Shows the current focal length of the lens (if lens data is available).
Shows the current battery supply level. If the level is below the configured warning level, the value is

flashing orange.

9

CLIP

Shows the current reel and clip number.

This manual is related to the following products: