2 mvf-2 cables, Mvf-2 cables – ARRI ALEXA Mini LF Ready to Shoot V-Mount Set (LPL) User Manual
Page 38

Multi Viewfinder MVF-2
38
JOGWHEEL
The
JOGWHEEL
(1) is used to
► scroll or navigate through lists and menus
► change values (by scrolling up or down)
► access and confirm settings (by pressing the
JOGWHEEL
center)
HOME / LIVE
Button
The
HOME / LIVE
button (2) toggles to display either the HOME screen (shown in the image above) or
the camera live view.
MENU / BACK
Button
Pressing the
MENU / BACK
button (3) while on the HOME screen or in camera live view opens the
camera menu. While in the camera menu, it serves as a
BACK
button.
Screen Buttons
The MVF-2 flip-out monitor has six screen buttons, three above (4) and three below (5) the screen.
Their function depends on the screen content and is labeled directly below or above each button.
Unlabeled buttons do not have a function for that screen. A grayed-out label indicates that the function
is currently not available.
12.2 MVF-2 Cables
The Multi Viewfinder MVF-2 is connected to the camera using an industrial CoaXPress cable. The
cable center pin and shield transport power, video, audio and data and the interface allows for hot-
plugging the viewfinder. Since the VF connector has no key, the viewfinder cable can be plugged in in
any orientation.
NOTICE
When attaching a new viewfinder to the camera for the first time, it may take around 2 minutes until
the viewfinder OLED calibration is fully loaded and activated.
Viewfinder Cables
MVF-2 viewfinder cables are available in the following lengths:
ID No.
K2.0023915
K2.0023943
K2.0023944
K2.0023945
Length
0.35 m (1.15 ft)
0.5 m (1.5 ft)
2.0 m (6.5 ft)
10.0 m (33 ft)
Suggested Use
For use of MVF-2 on camera left side in handheld mode
For use of MVF-2 with VEB-1 or VEB-3, for use on camera right side
The medium length for remote use
The longest possible length for remote use