AltiGen MAXCS 7.5 MaxCommunicator - Manual (Page 63)

MaxCommunicator Manual 57
Co
nfigur
at
ion
Enable Auto Dial
If you check this box, any phone number you dial using a Smart
Tag or the Select-n-Dial method is dialed automatically. The
phone number appears in the Number column and the state
column displays Ringing.
If this box is not checked, then a phone number selected by the
Smart Tag method or the Select-n-Dial method is displayed in the
MaxAgent dialer, and you need to click the Connect button to
make the call.
Release Link Tie (IP Trunk)
When checked, clicking the Transfer button will automatically
send “FLASH *” to release a tie trunk if the incoming call is through
an IP trunk. (Option is disabled by default.)
Important!
Before checking this check box, see your phone
system administrator. If your company is using
multiple systems and the tie trunk feature, the
administrator needs to have used Enterprise
Manager to synchronize the systems.
Otherwise this feature will not work.
Note: The call being transferred must originate from a
supported version of MaxCS.
Disable Auto Format
If the MAX Communication Server’s country code is US/Canada,
MaxCommunicator automatically adds the long distance/
international dialing prefix (corresponding to the server’s country
code) when returning a call from voice mail or when making a call
from the History tab. If this is not appropriate for your setup,
check Disable Auto Format.
Call Handling
Click the Call Handling tab in the Config window to configure
incoming call handling for your extension.