Pecitications, Product service – Panasonic DMR-T3040 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
;:>peciTicaTions
Recording system:
DVD video recording standards
(DVD-RAM),
DVD video standards (DVD-R)
Hard disk drive capacity: 40 GB
Opticai pick-up:
Recordable discs:
Recording time (1):
Recording time (2):
Discs played:
Video system
TV system:
System with 1 lens, 2 integration units
(662 nm wavelength for DVDs, 790 nm
wavelength for CDs)
12 cm 4.7 GB DVD-RAM discs
12 cm 9.4 GB DVD-RAM discs
8 cm 2.8 GB DVD-RAM discs
12 cm 4.7 GB DVD-R discs
(for General Ver. 2,0)
Max. 6 hours (using 4.7 GB disc)
XP: 1 hour
SP: 2 hours
LP: 4 hours
EP: 6 hours
Max. 52 hours (using Hard disk drive)
XP: 8.5 hours SP: 17 hours
LP: 34 hours EP: 52 hours
12 cm 4.7 GB DVD-RAM discs
12 cm 9.4 GB DVD-RAM discs
8 cm 2.8 GB DVD-RAM discs
12 cm 4.7 GB DVD-R discs
(for General Ver. 2.0)
DVD-VIDEO discs
CD-Audio discs (CD-DA)
Video CD discs
CD-R/CD-RW discs
(CD-DA, Video CD formatted discs)
NTSC system, 525 lines, 60 fields
Recording system; MPEG2 (Hybrid VBR)
Input:
LINE (pin jack), 1.0 Vp-p; 75 Q
S connector Y; 1.0 Vp-p; 75 O
C: 0.286 Vp-p; 75 O
Output:
LINE (pin jack), 1.0 Vp-p; 75 O
S connector Y: 1,0 Vp-p; 75 Q
C: 0.286 Vp-p; 75 Q
Component video output (480P/480i):
Y: 1.0 Vp-p; 75 Q
P
b
: 0.7 Vp-p; 75 Q
P
r
: 0.7 Vp-p; 75 G
Antenna reception input:
TV Channel: 2ch-69ch, 75 G
CATV Channel; 1ch-125ch, 75 G
Input:
Output:
Audio system
Recording system: Dolby Digital (XP/SP/LP/EP)
LINEAR PCM (XP mode only)
LINE (pin jack)
Reference input: 309 mVrms
FS:2Vrms(1 kHz, 0 dB)
Input impedance: 47 kG
LINE (pin jack)
Reference output: 309 mVrms
FS: 2 Vrms (1 kHz, 0 dB)
Output impedance: 1 kG
(Load impedance: 10 kG)
Number of channels:Recording; 2 channels
Playback; 2 channels
Other input/output connectors:
Digital audio optical output connector
(PCM, Dolby Digital, DTS)
Operating temperature range:
5"C-40 “C (41 °F-104 °F)
Operating humidity range:
10 %-80 % RH (no condensation)
Clock unit:
Quartz-controlled 12-hour digital display
LASER Specification
Class I LASER Product
Wavelength:
775-815 nm 655-666 nm
Laser power:
No hazardous radiation is emitted with the
safety protection
DV input:
IEEE 1394 Standard, 4 pin
PC card slot:
PC Card Type II
Compatible media: A PC Card adaptor conforming to PC Card
Standards
ATA Flash PC Card
PC Card adaptor (SD Memory Card, Multi
Media Card, Compact Flash, Smart Media,
Memory Stick)
FAT12 or FAT16
JPEG conforming to DCF (Design rule for
Camera File system)
DPOF compatible
320 X 240 to 6144 x 4096
(sub sampling; 4:2:2 or 4:2:0)
Approx. 7 sec. (2 M pixels)
AC 120 V, 60 Hz
36 W
Approx, 430 (W)x79 (H)x306 (D) mm
[Approx.16'V,6"(W)X3%"(H)X 12V,e"(D)l
(excluding protrusions)
Approx. 4.5 kg (9.9 lbs)
Format:
Image format:
Number of pixels:
Thawing time:
Power supply:
Power consumption:
Dimensions:
Mass:
8
c
2
£
Power consumption in standby mode: approx. 3.3 W
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Product Service
The unit should be serviced by quali- 3. Replacement parts—When parts need replacing ensure the ser
vicer uses parts specified by the manufacturer or parts that have
the same characteristics as the original parts. Unauthorized substi
tutes may result in fire, electric shock, or other hazards.
4. Safety check—After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
1. Damage requiring servici
fied service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change
in performance; or
(e) The unit has been dropped or the cabinet damaged.
2.
Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing
to authorized servicing personnel.
HQT6637