Panasonic DMR-T3040 - Manual (Page 30)

Changing audio
3
О
CQ
•Q
О)
,C
I*
AUDIO
ITTrn rnn iiWi'Pl I VCD I
You can change the audio being received or played.
During reception or play
Press [AUDIO].
How the type changes depends on when you press the button.
■ When receiving MTS audio (Multi-channel Tele­
vision Sound Stereo) or recording through the
DV input terminal
stereo
t____
SAP Mono
_________ I
Depending on the type of television broadcast and sound selected,
received and recorded sound is as follows;
Audio
selected
Televisioni^.
broadcast
Stereo SAP Mono
Stereo
+SAP
Main
audio
(Stereo)*'
Secondary
audio program
(SAP)*^
Main
audio
(Monaural)
Mono
-i-SAP
Main
audio
(Monaural)
Secondary
audio program
(SAP)*^
Main
audio
(Monaural)
Stereo Stereo*’ Stereo*' Monaural
Mono Monaural Monaural Monaural
Select “Mono” if reception is poor during a stereo broadcast.
If recorded in this mode, main audio is also recorded. Consequently
it is possible to choose between MAIN and SAP when playing back.
e.g., “Stereo" is selected --------- 1 -
“((" appears when the unit
is receiving the type of
audio you selected.
• If you alter the sound setting during recording, the sound wilt be
altered in the recording itself also.
• It will not be possible to alter the sound by pressing [AUDIO] in the
following cases:
- When the DVD drive is selected and a DVD-R is in the disc tray.
- When recording mode is XP and LPCM has been selected in
the SETUP menu, Audio Mode for XP Recording (->page 61).
• You cannot change audio type while recording with DVD-R or record­
ing on DVD-RAM with LPCM sound. You can use the SETUP menus
to select which audio type of an SAP broadcast is recorded, either
“Main" or "SAP" (-+page 61, Audio—Select MTS for DVD-R or LPCM).
___ • When recording through the DV input terminal, the unit records the
audio data as is from the tape, irrespective of the type you select
with [AUDIO] (•♦page 61, “Select Audio CH for DV input”).
■ While playing HDD or DVD-RAM
LR^L^R
t_______ 1
_.Dy(>:RAM_
• If you have recorded an SAP broadcast by pressing [AUDIO] to
select SAP
MAIN SAP
For your reference
You can change the audio for the images being played with simulta­
neous rec and play and Time Slip.
■ While playing DVD-R
You cannot change audio type.
■ While playing DVD-Video
You can change the audio channel number each time you press the
button. This allows you to change things like the soundtrack language.
Sound track
e.g., English is the selected language.
The language is switched to French.
■ While playing Video CD
LR->-L->R
t_______ I
e.g., “L R” is selected
_ D J
If you cannot change the audio type when you have used only an
optical digital cable for connection, set “Dolby Digital” to “PCM”
(^page 62). Alternatively, you may connect to an amplifier with an
audio/video cable and change the input on the amplifier to suit the
connection.