Panasonic DMR-T3040 - Manual (Page 36)

Timer recording
?
o
u
2Ì
u
s
RETURN
Auto Renewal Recording
If you record a program onto HDD repeatedly everyday or every
week using timer recording, the unit will record the new program
over the old one.
This function can be used only when weekly recording or
daily recording is selected for “DATE”.
While the timer recording list {->page 35, step 4) is displayed
Press [A, T] to select the program
and then [ENTER].
01 M MC WEEIIUnit tMPII ifflIPH Sr i? ->M1
02H«C 3;«niE iJOPH 3:WPH SP
Kaw timti Prooram
2
Press
[< ,
►] to select
“RENEW”.
3
Press [A, T] to select “ON” and then
[ENTER].
The timer recording list reappears.
• If a program set for Auto Renewal Recording is protected, the program
will not be overwritten. Instead the program set for recording will be
. saved as a separate program, and this program wiN be the one to be
overwritten when the next Auto Renewal Recording takes place.
• When play back is taking place from the HDD, auto renewal
recording will not be carried out. The program supposed to be auto
renewal recorded will be recorded as a separate program.
• Play list scenes made from programs that were set for Auto
Renewal Recording are erased along with auto renewal.
• When there is not enough space on the HDD, the program may not
be recorded completely (even if repeating a renewal recording).
Check programs
1
Press [PROG/CHECK].
The timer recording list appears.
• 01 MABC 3/26 TUE12:10 PM 1:22 PM LP rS Enable
®.0t 64 ABC SUN-SAT2:30PM 2:4DPM LP ->3/31
® 03 64 ABC3/26 TUE 2:30 AM 3:30 AM SP 0«e[^
□ <04 64 ABC 3/25 MON9:COAM10:ODAM SP
® '06 :64 ABC3/25 MONMAM 9:00AM SP
^
® ,06 :64 ABC 3/25 MON .10:00 AM11:00 AM SP '
Hew TItnet Program
......... 1
snsi.
Press ENTER orVCRPIusrlo
Store new program.
Icon explanations
©The times overlap those in another program.
• This program is currently recording.
©The disc was full or the maximum number of programs or
scenes was reached so the program failed to record.
^ The material was copy-prohibited so it was not recorded.
©The program failed to record for some other reason.
•Programs that failed to record are displayed gray. They
are automatically deleted from the timer recording list at
4:00 AM on the second day after recording was sched­
uled.
^Auto Renewal Recording indicator
The program will be automatically recorded over in
succession.
Relief Recording indicator
Programs that have been rerouted to the HDD because of
insufficient space.
Recording drive indicator
HDD g OVD
Message displayed in the CHECK line
Some of the information shown in the CHECK line may not be
correct while you are recording.
Enable: ' Displayed if the recording can fit in the remaining
space on the disc.
^ (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present time)
based on the time remaining on the disc.
!: It may not be possible to record because there is
no more space left on both HDD and DVD-RAM/R.
2
Press [PROG/CHECK] or [RETURN].
RQT6637