Panasonic DMR-T3040 - Manual (Page 56)

Home Theater
• The equipment connections described are examples.
• Peripheral equipment and optional cables sold separately unless otherwise indicated,
• Before connection, turn off all equipment and read the appropriate operating instructions.
• The signal from the cable TV box or satellite receiver passes through this unit to the television even when this unit is turned off.
Connecting a cable TV box/satellite receiver
You need to subscribe to a cable TV or satellite TV service, to enjoy viewing their programming. rfOtB
• Consult your service provider regarding appropriate cable box or satellite receiver.
• Select the applicable input on your television to view the output from your cable box or satellite receiver, Channel 3 or 4 if connected
via antenna (RF), or the applicable video input on the television is connected using the audio and video connections.
One cable TV box/satellite receiver Two cable TV boxes
c
.o
s
0)
&
u
c
2
■O
AUDIO VIDEO >
IN IN VHF/UHF
R L RFIN
О ® © ©◄ч
Audio/Video cable (included)
red white yellow
75 О coaxial cable
(included)
To household
home satellite system
(Dishnetwork/DSS) jack
идя
When a home satellite system (Dishnetwork/DSS) is connected,
auto tuning and auto clock setting may not operate properly. Set the
clock manually (->page 13).
You cannot
• view channels other than the one selected when recording.
• do a timer recording unless the channel is first selected on the
cable TV box or DSS receiver.
You can record and vjew both scrambled and unscrambled channels
if connections are made as shown in the diagram below.
• view channels other than the one selected when recording.
• do a timer recording unless the channel is first selected on the
cable TV box.
HQT6637