Panasonic DMR-T3040 - Manual (Page 43)

Add (maximum 999 scenes)
Press
to select
where you want to
add the scene and
press [ENTER].
Press [ENTER]
at the start point
of the scene.
Press [ENTER] \
at the end point ^
of the scene.
Press [A, T] to
select “Exit”
and press
[ENTER].
The new scene is
inserted before the
highlighted scene.
Press [ A, T] to select “Next” and press [ENTER]. (Repeat to add other scenes.)
Move
The scene is moved.
Repeat to move other scenes.
Re-edit
Press [A, T,^,^]
to select the scene
and press [ENTER].
Press [ENTER]
at the start point
of the scene.
Press [A, ▼]
to select “Exit’
and press
[ENTER].
The re-edited
scene replaces
the old one.
Press [A, T] to select “Prev.” or “Next” and press [ENTER]. (Repeat to re-edit other scenes.)
Erase
►
Once a scene has
been erased, it is
irretrievable. Check
carefully before
proceeding.
Press
[ A , T , ^ , ^ ] t o
select the scene
and press
[ENTER].
Press [◄] to
select “Yes”
and press
[ENTER],
• The selected scene is
erased from the play list.
• The play list itself is
erased if you erase all the
scenes in it.
Repeat to erase other scenes.
• Use search and slow-motion to find the start and end
points.
• You cannot specify an end point before a start point, or a
start point after an end point.
• You may not be able to specify points within 3 seconds of
each other.
• Play pauses if the end of the last program is reached
during this procedure.
• You cannot edit still picture images.
• Depending on the state of recording, the actual number of
play lists or scenes that can be recorded may be
less than that specified in this manual.
• The picture illustration on the right may be
shown in the HDD play list scene display. This
picture illustration indicates pictures that are
permitted to be recorded only once.
Oi
.C
§