Panasonic DMR-T3040 - Manual (Page 35)

Manually programming timer recordings
You can enter up to 32 programs up to a month in advance. Each
daily or weekly program is counted as one program.
1
Press [PROG/CHECK].
The timer recording list appears.
A line that is ready ■
for programming is
highlighted.
i.a n 64 MC VitniE tfflIPM MMPW iP rsfaatte
- WwTItmrPrWriiir
2
Press [ENTER].
The timer recording setting screen appears.
V.
Press [►] to move through the items
and change the items with [A, ▼].
• The current settings are shown each time you press [►].
• You may use the numbered buttons to enter the CHANNEL,
DATE, ON (Start Time), and OFF (Finish Time).
...-giB'.'-.cga-'^Esa
ii ESSll.
• CHANNEL (Channel number and caption)
• DATE
Current date------ »■the day before one month latere
SUN-SAT^MON-SAT-»MON-FRI-*
WEEKLY SUN----- vWEEKLY SAT (—Return to Current date)
• ON (Start time)/OFF (Finish time)
The time increases or decreases in 30-minute increments it
you hold the button.
• MODE (Recording mode -^page 19)
SP—XP—FR—EP—LP (—Return to SP)
• DRIVE
HDD — ► DVD
•RENEW
(Only when you set daily or weekly recording onto HDD
^page 36, Auto Renewal Recording)
ON^—>OFF
• Enter Title
Select “Enter Title” using
page 45). ►] and press [ENTER] (->
Press [ENTER] when you have fin­
ished programming the timer.
The timer recording list reappears.
Bans:. .
‘Q1 3fIETUE 1:IKIPMii:00PM S?
nutec t/aruE 2 : 311 « 3:oo pm SP ^(W
Nn itoier Prwjiii k—/
Displayed if the
recording can fit in
the remaining
space on the disc.
• Press [▲, T] to select “New Timer Program" and repeat
steps 2- 4 to program other recordings.
Press [PROG/CHECK] or [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode (“El” appears on the unit display).
The unit is not off. To save power, turn the unit off by pressing
[Cb, DVD POWER].
Notes on timer programming
To cancel the unit from recording standby
Cancel all the timer recording programs using [CANCEL]
(-►page 37).
To stop recording when recording has already begun
While the recording drive is selected
Press [■], then [ENTER] within 5 seconds.
(Recording stops.)
• The remaining time displayed is based on the current recording
mode.
• Scheduled timer recordings will be activated even if playback
or other recording is already taking place.
• When recording more than one program in a row, for HDD and
DVD-RAM the first few seconds, and for DVD-R about the first
30 seconds of all programs from the second one onwards will
not be recorded.
• Timer recording will not be activated if editing or dubbing is
being carried out.
• If you set DST (Daylight Saving Time) to ON when manually
setting the clock (^page 13), timer recording may not work
when summer switches to winter and vice versa,
• When timer recording starts, the record lamp (-^page 7, Main
unit) lights, even if the unit is oft.
Relief Recording
When the recording drive is set to "DVD" for timer recording, the
unit will automatically evaluate if the program will fit onto the disc
before beginning recording. If the program will not fit then the
recording drive will be altered to
“HDD” automatically.
• If the time remaining on the HDD is insufficient, as much of the
program as possible will be recorded onto the HDD.
• If there is no disc in the tray or the disc cannot be recorded on,
the recording drive will be altered to HDD.
• The recording mode will not be altered.
• The Direct Navigator shows which programs were relief-
recorded (-►page 26).
■
O)
c