Connecting an amplifier or system component – Panasonic DMR-T3040 User Manual
Page 57
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an amplifier or system component
This model can play Dolby Digital, but only in two channels. This model does not have a DTS decoder. You must connect a unit with a
Dolby Digital or DTS decoder to enjoy surround sound.
(T^
c
.0
iz
2
Q)
&
*0
s
C
2
■O
Recording to digital recording equipment or cassette deck
Digital recording
You can record the digital signal directly to digital recording equip
ment Connection H above).
•
• With DVD, the following conditions must be met: © the disc
doesn’t have protection preventing digital recording, and © the
recording equipment can handle signals with a sampling fre
quency of 48 kHz.
• You cannot record DTS signals.
When recording DVDs, make the following settings.
V.S.S.:OFF (->page51)
PCM Down Conversion: On (->page 62)
Dolby Digital; PCM (-►page 62)
DTS: Off (-►page 62)
Analog recording
You can record to a cassette deck or other recording equipment (^
Connection H above).
There are no limitations on recording analog signals as there are
with digital signals.