Panasonic DMR-T3040 - Manual (Page 2)

•o
£
V.
S
(A
ÇJï
.c
£
O
C5
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR
YOURSELF.
REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK OR PRODUCT DAMAGE, DO NOT
EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND
THAT NO OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHALL BE PLACED ON
THE APPARATUS.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
A
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
A
A
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of suffi­
cient magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the ap­
pliance.
FCC Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part
15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential instal­
lation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accor­
dance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or televi­
sion reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution: To assure continued compliance, follow the
attached installation instructions and use only shielded inter­
face cables when connecting to peripheral devices.
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s author­
ity to operate this equipment.
This device complies with Part 15 of the FCC Rules. Opera­
tion is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
- V6SU AND PfASeU LASER (UOUTION WHEN om.
Avon DWEC7 EXPOSURE TO etAM. (FDA J1 CFR)
VAKI - AVArrAC;^ OtCT AITTMA MAxyvU JA HÂKYtÛTÔN
tJ^RVrELYLLE. ALÎ KATÍD SATEESEEN.
VARMMQ - STWXï OCH OSVNUC LASERSTpÀLNMQ MÂR OEtWA DEL
AR O^AD, eETRAKTA EJ STRALEK____________________
{ EKSPONERmC FOH STRA l EN.
l WCHT KM STRAHL AUSSET2EN.
S ■ 'ZZt H < L / - m X T .
(Inside of product)
Accessories
Please check and identify the supplied accessories. Use numbers indicated in parentheses when asking for replacement parts.
To order accessories contact 1-800~633-9626.
Q 1 Remote control
(EUR7615KF0)
Q 1 Audio/Video cable □
(VJA0788)
□
2 Batteries
for remote control
□ 1 AC power supply cord
(VJA0488)
1 75 Q coaxial cable
(VJA1091)
□
1 BNC-RCA adaptor plug □
set (K2RB063E0002)
1 Cleaning cloth
for cleaning the mirror sec­
tion on the front of the unit
(RFE0088-1)
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
HQT6637