Timer recording, Using vcr plus+ codes to make timer recordings, 1 press [vcr plus – Panasonic DMR-T3040 User Manual
Page 34: Press [enter, 4 press [return, Notes on recording, Using vcr plus-f codes to make timer recordings, Press [vcr plus, Press [return
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer recording
§
o
o
£
E
Preparation
• Ensure the dock (and guide channels for VCR Plus+ recording,
page 14) are set correctly.
• Cancel Disc Protection {-♦page 38) or Cartridge Protection
(-»page 8) if they are currently set.
Using VCR Plus+ codes to make timer
recordings
Entering VCR Plus+ codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga
zines. You can enter up to 32 programs up to a month in advance.
1
Press [VCR Plus+].
2
Press the numbered buttons to enter
the VCR PIUS+ code.
Press [-^] to move back to correct a digit.
Press [ENTER].
The timer recording setting screen appears. Confirm the pro
gram and make corrections if necessary using [A, T, ◄, ►].
• To select the recording drive
© Press [◄, ►] to select “DRIVE”.
@ Press [A, ▼] to select “HDD" or “DVD".
• To change the recording mode
Press [REG MODE].
• To enter the title of the program
Press [◄, ►] to select “Enter Title” {♦page 45) and press
[ENTER].
■,
(g* ■ .
0=0
• The current re
cording mode
(shown on the
unit’s display) is
automatically
selected.
V
When you press [ENTER]
The timer recording list appears.
01 19 UlMim S:10PII SP n&atfe
Oiw Timtf Prggrjni ''i
-
OPign
Displayed if the recording can fit in the remaining space on
the HDD or disc.
Repeat steps 1-3 to program other recordings.
4
Press [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode (“[3" appears on the unit display).
• The unit is not off. To save power, turn the unit off by press
ing [c!), DVD POWER].
rna
• The actual time recorded may be longer than the program itself
when television programs are recorded using VCR Plus-i-.
• If the recording mode is not selected, the default setting will be the
setting on the unit at the time of setting timer recording (except for
when “XP” is selected, in which case the recording will be made in
“FR”).
• “Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
• “All timer programs are occupied.” appears if there are already 32
programs.