Video menu, When “user” is selected – Panasonic DMR-T3040 User Manual
Page 52
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using on-screen menus
2
0>
&
?
u
c
s
■O
Video menu
Not available when playing CDs.
птялппт1гдтаппиддгуср1
.. Audio
Item
Content
Picture
Normal
Soft: Soft picture with fewer video arti
facts
Fine: Details are sharper
Cinema: Mellows movies, enhances detail in
dark scenes.
User: You can make further adjustments.
See below.
MPEG-DNR
(When any item other than “User” is
selected)
You can turn the recommended - -
settings for 3D NR, block NR, and
mosquito NR on and off.
ON*—»OFF
■ When “User” is selected
Select “Detail picture adjustment”.
{“User-> [◄]-► [¥]-► [ENTER])
Contrast
Briqhtness
Sharpness
Color
Page 1/2 of “Detail picture adjustment'
Contrast
Increases the contrast between light and
dark parts of the picture (-7 to +7).
Brightness
Brightens the picture (0 to -f-15).
Sharpness
Adjust the sharpness of the edges of the ver
tical lines (-6 to 4-6).
Color
Adjusts the shade of the picture's color (-7
to +7).
Press [ENTER] to enter the setting.
Press [▲] or [▼] until page 2/2 appears.
Page 2/2 of “Detaii picture adjustment”
Gamma
Increases the brightness of the center
rariges to improve detail and contrast in dark
scenes (0 to -i-5).
3D NR
Reduces overall noise (0 to -t-4).
Block NR
Smoothes block noise (0 to -i-3)..
Mosquito NR
Reduces the smudging that appears around
contrasting sections of the picture (0 to -t-3).
When you have set “TV Type” to “480P” in
SETUP (-►page 16)
Picture.——
MPEG-DNR
Proqresstve
Transfer
Item
Content
Progressive
ON: Enables progressive output
OFF: Disables progressive output
3
Transfer*
Select the method of conversion for progres
sive output to suit the type of material being
played (-►page 65, Film and video).
Autol (normal): For film material
Auto2: For film material (the same as
Autol, but able to convert 30-
frame-per-second progressive
video.)
Video: For video material
Only applicable in cases where the “Progressive" function is ON.
Press [ENTER] to enter the setting.