ITC VerifyNow System Platelet Reactivity Test - Manual (Page 81)

Page 77 14439.C 03/2013
Appendix - 11
VerifyNow System User Manual | USA
11 Appendix
11.1 Technical Specifications
Feature Specification
Dimensions (WxDxH)
(See Note 1)
9.5 x 9.3 x 6.5 in / 24 x 23 x 16.5 cm
Location
Clean, firm, level surface without vibration.
Avoid placement near sources of heat or cold,
incandescent lighting or direct sunlight.
Service Access Perimeter 4 in / 10.4 cm
Weight 4 lb / 1.8 kg
AC Voltage
100-240 VAC (50/60 Hz)
Printer accessory not included
Power Rating 40 Watts Max, Continuous
Fuses Two (2) 1A/250V, 5x20mm SLO-BLO type
Operating Temperature 64°-90° F / 18°-32°C (0-85% RH, non-condensing)
Operating Altitude Tested at altitudes up to 7,350 feet
Shipping/Storage Temperature 14°-113° F / -10°-45°C (0-95% RH, non-condensing)
Calibration Factory set
Display Dot matrix liquid crystal
NOTES:
The printer accessory is recommended with the system but is not included in current dimensions.
11.2 Explanation of Symbols
Catalog Number This End Up
Serial Number Fragile
Authorized Representative in
the European Community
Keep Dry
Manufacturer Load Limit
Temperature Limits In vitro Diagnostic
RH Relative Humidity Single Use
P Atmospheric Pressure Remove
Lot Number Contains sufficient for < n > tests
Do not dispose as unsorted
municipal waste.
Refer to this symbol’s placement
in the user manual for detailed
information