Baseline Systems BaseStation 1000 - Manual (Page 78)

BaseStation 1000 Irrigation Controller Manual
8 – System Setup
The BaseStation 1000 has a number of features that enable you to set up and maintain the
controller. You can back up your system with a USB drive, and then you can use those backup files
to restore your system if it ever goes down. You can also ensure that your controller has the most
current firmware code with a download from the Baseline web site or from BaseManager.
Setting the Controller Date and Time
Set or change the controller date and time to match the current date and time. If the controller is
connected to BaseManager 2.0, the time will be automatically set by the server.
WARNING! Changing the date and time can cause watering events to be missed.
1. Press the System Setup button. The System Maintenance menu displays.
2. The Time & Date Setup option should be highlighted. If it is not highlighted, press the  or 
button to highlight it, and then press the OK
button. The Time & Date Setup screen
displays.
3. In the Time field, notice that the hours
placeholder is highlighted.
 To change the time, press the + or –
button.
 To move to the minutes placeholder, press the  button.
4. Press the  button to move to the Date field.
 Press the  or  button to move to the date field that you want to change.
 Press the + or – button to change the value in the field.
5. Press the  button to move to the Weekday field, and then press the + or – button to change
the value in the field.
6. Press the  button to move to the Time Format field, and then press the + or – button to
change the value in the field. This field enables you to switch the time format between
AM/PM and 24 hour settings.
Example: In AM/PM format 10:00A and 10:00P
In 24 hour format 10:00 and 22:00
7. When you have finished making changes, press the RUN button.
Page 72