Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 - Manual (Page 62)

3. Pull out the Grip Cylinder Cap side
Pin (CP).
4. Pull out the Grip Cylinder Rod side
Pin (RP).
5. Slide out the Grip Cylinder (C).
6. Place the new Grip Cylinder into
the Cap side Eye (CE) and Rod
side Eye (RE).
7. Insert the Grip Cylinder Cap side
Pin (CP).
8. Insert the Grip Cylinder Rod side
Pin (RP).
9. Use the Two 11/16" wrenches to
connect the Cap side Hose (CH).
10. Use the Two 11/16" wrenches to
connect the Rod Hose (RH).
Changing the Grip Cylinders
Part Name Part #
Grip Cylinder Cap Pin (CP) 061-98404A874
Grip Cylinder Rod Pin (RP) 061-98404A888C
Grip Cylinder (C) 061-J26
Part Numbers
CP RP RE CE
NOTE
Consistent lubrication of the Spinner
increases performance and
component life.
WARNING
Make sure the Grip Cylinder Rod
and Cap side Hoses are properly
connected.
C
62 Maintenance & Repair