Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 - Manual (Page 47)

47 Maintenance & Repair
8. Slide in the Drive Roller Sprock-
ets (4) . Make sure the "T" on
each Drive Roller Sprocket faces
up.
9. Replace the Bearing Caps (2)
and Bearing Seals (3).
10. Use the 3/4" wrench to replace all
Bearing Cap Bolts (9). Use new
Lock Washers (12) and red loctite
when replacing the Bearing Cap
Bolts (9). Assemble the Lock
Washers (12) as shown. Torque
Bearing Cap Bolts (9) to 75 lb. ft.
Changing the Drive Rollers
Maintenance
& Repair
Part Numbers
WARNING
Replace all four Drive Rollers.
Running the Spinner with worn
Drive Rollers will damage the chain
and hinder Spinner performance.
IT EM P ART NO ./DES CRIP TIO N
1 25703-S R Cas e A s s em bly , M oving A rm
2 24622 B earing Cap
3 24654 B earing S eal A s s em bly
4 24623 Roller S proc k et
5 24649 Roller
6 24643 K ey , Roller
7 RS T-275-S Retainer Ring
8 24731 S phere-Rol B earing
9 806373_1.2-20 x 2.00 lg.Hex B olt G rd. 9
10 805834_1.4-20 x .50 lg. Hex B olt
11 811150_#14 B ras s W as her
12 91074A 033 Loc k W as her A s s em bly , 1.2
13 805867 1.4-20 X 1 1.2 Hex Tap S S
14 810587_1.4 Loc k W as her