Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 - Manual (Page 32)

Wrench Maintenance
1. Surface grease the hook thread
(T) on the top wrench, middle
wrench, and bottom wrench.
2. Rotate the wrench nut (N) on the
top wrench, middle wrench, and
bottom wrench to spread grease on
the full thread area.
Grease Once per Week
Wrench Hook
T N NS
Wrench Nut
1. Surface grease the wrench nut
surface (NS) on the top wrench,
middle wrench, and bottom
wrench.
Hook Pivot Bearing Cap
1. Pump the Hook pivot bearing cap
grease fitting (H) on the top and
bottom of each wrench.
NOTE
Consistent lubrication of the wrenches
increases performance and component
life.
32 Maintenance & Repair
H H1
Hook Surfaces
1. Pump the hook surface grease
fittings (H1) on the bottom of each
wrench
Part Numbers
Part Name Part#
Straight Grease Fitting 061-1103K1
90° Grease Fitting
061-1103K3
45° Grease Fitting 061-1103K2