Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 - Manual (Page 34)

Wrench Maintenance
Tools Required
Grease Once per Month
Mounting Arm Pivot Points
1. Pump grease fittings MP1-MP4.
Part Numbers
Part Name Part #
Straight Grease Fitting 061-1103K1
Grease gun
NOTE
Consistent lubrication of the mounting
arm pivot points increases performance
and component life.
34 Maintenance & Repair
MP2 MP1
MP4 MP3
1. Make sure the HawkJaw is off the
drill pipe connection and in the rest
position on the derrick.
2. Shut down the Hydraulic power
unit.
3. Press, push, and pull all control
buttons repeatedly to bleed
hydraulic pressure.
4. Press the E-Stop (E) button on the
right control handle.
5. Disconnect the Air power supply.
6. Assume that there is still a load on
every actuator. Proceed with
caution.
Initial Steps
E