Adjust spinner for break out (cont.) – Hawk Industries Hawkjaw Jr. Manual 65K-2GJR Serial Numbers 10 to 20 User Manual

Page 26

Adjust Spinner for Break Out (cont.)

26 Operation

Rest Position

1. Remove the Spinner Arm Pins

(P).

2. Rotate the Spinner back to the

Pullback position (R).

3. Insert the Spinner Arm Pins (P)

with retainer clips.

7. Use the rotary table to spin drill

pipe larger than 5 1/2" OD.
Place the HawkJaw spinner in
the rest position.

Part Numbers

Part Name

Part#

Quick Release Pin

061-20093

Retainer Clip

061-92391A056