E 4-10 – Innotech eServer User Manual
Page 81
Page 81
eServer Setup and Site Installation Instructions
© Mass Electronics Pty Ltd 2009
Chapter 4 – Configuring eServer Communications
Figure 4-10: Check the eServer and Chronicle Server settings for the iComm Server
From the IO Server Properties General Tab, enter site specific IO Server Properties and connection
information, as illustrated below in Figure 4-10. For example, enter the following:
IO Server Name: enter a name for your IO Server (for your reference)
Type of IO Server: Select the type of IO Server (iComm Server, or other)
Host Computer:- Enter the internal network DNS name or internal static IP address for the computer
running the IO Server; for example "iComm on Computername".
External Address: Enter the valid external DNS name or external static IP address for the computer
running the IO Server; for example "DNSName.domain.com".
It is critical that the settings entered for Host Computer and IO Server Security exactly match settings in the Innotech
Chronicle software (which writes to the SQL Server database). Refer to the representation at Figure 4-10 below for a
guide on which fields relate directly.
The use of the term localhost, or address 127.0.0.1 for any fields or settings is not recommended. Please use a valid
DNS name or static IP address for all connection details.
IMPORTANT