Innotech eServer User Manual
Page 76

eServer Setup and Site Installation Instructions
Page 76
© Mass Electronics Pty Ltd 2009
Edition 5.0 dated 07/01/2014
Enter the Access Database settings as described below, and illustrated below in Figure 4-4.
Access Driver: Select the appropriate Access Driver to use for the Access Database. For an Innotech
iComm Access Database, use version 2000-2003.
Access Database File: Navigate to and select the Access Database to use with Magellan. For an
Innotech iComm Access Database, the default path is:
c:\Program Files\Innotech\iComm\iCommDatabase
Automatically Connect on Startup: Select this option to enable automatic connection to the Access
Database at project launch (Recommended). Alternatively, use Magellan commands to connect /
disconnect as required during runtime.
Figure 4-4: Selecting Access database Type in Magellan Project Properties
Click OK to save and apply your Magellan Project Properties changes.