HP E1459A - Manual (Page 67)

66 HP E1459A SCPI Command Reference
STATus:QUEStionable:CONDition?
Always returns a 0.
Note The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
Parameters None
Comments •
No bits are defined.
•
*RST clears all Status Questionable Conditions.
•
*CLS does not affect the contents of the Status Questionable Conditions.
•
The STAT:PRESet command does not affect the Status Questionable
Conditions.
STATus:QUEStionable:ENABle < mask>
Sets the value of the QUEStionable Status Enable Register.
Note The Questionable Status Condition, Event, and Enable registers exist for SCPI
compliance only. No status bits are defined or reported in these registers.
Parameters None
Comments •
No bits are defined.
•
*RST and *CLS do not affect the value of the enable mask.
•
The STAT:PRESet command sets the value of the enable mask to 0.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com