HP E1459A - Manual (Page 46)

HP E1459A SCPI Command Reference 45
DISPlay:MONitor[:STATe] < state>
Turns the Display Mode on or off.
Parameters
Comments •
DISP:MON ON enables the terminal display of Port parameters. The
parameters are updated to the terminal following each new command
accessing a Port.
•
The displayed data is in the format:
-- Displayed port number: 0, 1, 2, or 3
-- Size of the data: 16-bit word or 32-bit word
-- Actual data: signed decimal and hexadecimal
•
A keyboard entry at the terminal sets DISP:MON OFF.
•
*RST Condition: OFF.
Example DISP:MON ON turns the display mode on.
DISPlay:MONitor[:STATe]?
Returns the value of the Display Monitor State as either 0 (for OFF) or 1 (for ON).
Parameters None
Comments •
DISP:MON[:STAT]? returns a 1 if the monitor mode is on; or returns a 0 if the
monitor mode is off.
Example DISP:MON?
Parameter Name Parameter Type Range of Values Default
Numeric or discrete 0 | 1 | OFF | ON OFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com